Public Notice for Clean Production Audit of Jiangxi Fengri Power Supply Co., Ltd.
Classification: Fengri Dynamics
Release time: 2019-08-24
Summary:
Public Notice on Clean Production Audit of Jiangxi Fengri Power Source Co., Ltd.
To effectively improve the company's production and operation, enhance economic benefits, reduce pollutant emissions, and in line with the company's development needs, our company launched a comprehensive clean production audit in March 2019and entrusted Yichun Huizhong Energy-Saving Assessment Co., Ltd. to provide technical guidance for the audit work.
In accordance with the requirements of the "Clean Production Promotion Law of the People's Republic of China" and the "Clean Production Audit Measures", we hereby publicly announce the basic situation of our company before the audit and the status of pollutant discharge. We invite the public to supervise the implementation of the clean production audit.
I. Basic Information of the Enterprise
1.Company Name: Jiangxi Fengri Power Source Co., Ltd.
2.Legal Representative: Li Fugen
3.Company Address: No. 1, Fengri Avenue, Pharmaceutical Industrial Park, Yuanzhou District, Yichun City
4.Production Scale: Annual production of 1.8 million kVA valve-regulated sealed lead-acid batteries
5.Main Products: Valve-regulated sealed lead-acid batteries
6.Main Pollutants: Wastewater, waste gas, lead-containing hazardous waste
7.Main Environmental Protection Facilities: Wastewater and waste gas treatment facilities
II. Wastewater Discharge Situation Before the Audit
Production Wastewater:Production wastewater mainly includes lead and acid-containing wastewater generated from processes such as plate washing, battery cleaning, floor cleaning, staff hand washing, work clothes washing, and flue gas purification in the battery production section, as well as initial rainwater in the production area. A wastewater collection, treatment, and reuse system is constructed following the principle of "separation of clean and dirty water, separation of rainwater and sewage, graded collection, and classified reuse." The remaining production wastewater is treated and reused entirely, with no discharge. After collection, the production wastewater is treated at the production wastewater treatment plant through neutralization, coagulation, sedimentation, filtration, and activated carbon filtration. The treated water meets standards and is reused in the production system, with no discharge.
The specific process flow chart is as follows

Domestic Sewage:Domestic sewage generated from employee daily activities undergoes pretreatment in a sewage equalization tank and is then discharged into the Yichun Economic and Technological Development Zone wastewater treatment plant via the park's pipeline network. After treatment to meet the standards of the "Discharge Standard for Pollutants from Urban Wastewater Treatment Plants" (GB18918-2002), it is discharged into the Wojiang River through the park's sewage pipeline network.
Waste Gas:Waste gas mainly comes from organized and unorganized emissions from processes such as plate casting, ball milling and powdering, paste application, plate brushing, plate packaging, welding, and internal formation charging.
(1)Plate Casting Process Waste Gas
Using HKElead fume purification device + high-efficiency water mist dust collector, discharged through a 15-meter exhaust stack.
The specific process flow chart is as follows:

(2)Ball Milling and Powdering Process Waste Gas
Using DMCtype bag filter + filter cartridge dust collector + HEPA filter, discharged through a 15-meter exhaust stack.
The specific process flow chart is as follows:

(3)Paste Application Process Waste Gas
Using automatic feeding, automatic control of stirring speed and temperature, and carried out in a closed environment, lead fumes and sulfuric acid mist generated during paste application are treated using an impact water bath dust collector +packing absorption tower, and the tail gas is discharged through a 15m high exhaust stack.
The specific process flow chart is shown below:

(4)Plate Brushing and Cut Ear Process Waste Gas
Automatic plate brushing, edge grinding, and automatic plate weighing are carried out under closed ventilation conditions. The lead dust generated in this process has larger particles and higher concentration. It is treated using a bag filter +filter cartridge dust collector + HEPA filter (high-efficiency air filter), and the tail gas is discharged through a 15m high exhaust stack.
The specific process flow chart is as follows:

(5)Plate Packaging Process Waste Gas
Using an automatic packaging machine, the generated lead dust is treated using a cyclone dust collector +bag filter + high-efficiency water mist dust collector, and the tail gas is discharged through a 15m high exhaust stack.
The specific process flow chart is as follows:

(6)Welding Process Waste Gas
Using an automatic casting welding machine, each casting welding machine is equipped with a fume hood, and the generated lead fume is collected and treated using an HKE lead fume purifier + high-efficiency water mist dust collector. The tail gas is discharged through a 15m high exhaust stack.
Actual Situation:Using HKE lead fume purification device +high-efficiency water mist dust collector, discharged through a 15-meter exhaust stack.
The specific process flow chart is as follows:

(7)Internal Formation and Charging Process
The charging (internal formation) process should be carried out in a closed workshop, and the generated sulfuric acid mist is collected and treated using an alkaline spray tower, and the tail gas is discharged through a 15m high exhaust stack.
The process flow chart is as follows:

Solid Waste and Hazardous Waste Liquid
Solid waste and hazardous waste liquid mainly come fromproduction wastes generated during battery production, including HW31Lead-containing waste: cast plates, lead slag from welding, lead mud separated from coated plates, ditches, and substandard plates, lead-containing sludge from wastewater treatment plants, lead dust collected by dust removal facilities, spent activated carbon from filter replacement in water treatment processes, scraps from the casting process, and hanging ears cut from brush pieces; Lead-containing waste designated as HW31: filter bags replaced from environmental protection equipment and lead-containing materials/filter materials replaced from production equipment, personal protective equipment such as gloves and masks used by production line employees, substandard products produced during production, and substandard products returned from the market (discarded lead-acid batteries)
Lead mud, lead-containing sludge, lead dust, spent activated carbon, scraps, hanging ears, spent filter materials, used lead-containing personal protective equipment and waste bags, and discarded lead-acid batteries are hazardous waste. Among them, scraps are directly recycled, and the hooked parts cut from the brush piece process (controlled to be added within about 5% of the casting material) are returned for use in production, while the rest is recycled and processed by the qualified Anhui Huaxin Lead Industry Group Co., Ltd. Raw material packaging, waste metal from machine repair, waste packaging, and domestic garbage are considered general solid waste. Waste packaging and waste metal are directly sold, and domestic garbage is collected and disposed of by the sanitation department.
The company has constructed a 225m2general solid waste room in the factory area for temporary storage of general solid waste, and a 117.6m2hazardous waste room for temporary storage of hazardous waste. The floor and skirt of the hazardous waste room are treated with anti-corrosion and anti-seepage materials, and a leachate collection pool and collection ditch are built. Hazardous waste is stored separately, and the construction of the hazardous waste room meets the requirements of the "Standard for Pollution Control of Hazardous Waste Storage" (GB18597-2001).
The company has set up hazardous waste identification marks on the containers or packaging of hazardous waste, as well as on the facilities and sites for collecting, storing, transporting, and disposing of hazardous waste. Hazardous waste and non-hazardous waste are collected and stored separately. An internal hazardous waste transfer ledger has been established, and conspicuous hazardous waste marks are placed on the outside of the packaging boxes. Personnel directly involved in the collection, storage, transportation, utilization, and disposal of hazardous waste undergo pre-job professional training and are qualified before taking up their posts.
III. Contact Person and Contact Information
Reviewing Company: Jiangxi Fengri Power Supply Co., Ltd.
Contact: Xiao Bin
Tel: 13707495503
Consulting Unit: Yichun Huizhong Energy Efficiency Evaluation Co., Ltd.
Contact: Feng Bo
Tel: 13907958618
Key words: Public Notice for Clean Production Audit of Jiangxi Fengri Power Supply Co., Ltd.
Liuyang - Hunan - China
+86-731-83219796
fengri@fengri.com
